Retrofit Shell Guides

How to Pair Your Device:

1, Firstly determine the model of tracker card you have. They vary depending on the tracker style you have purchased.

Type A and B require the card to be placed in the housing with the pairing button facing outward. Type C requires it to be placed with the pairing button facing inward. Ensure you place your card correctly in to your housing after pairing as shown:

2, hold the pair button shown below for 3 seconds until you hear an audible beep. Only Type C cards require the card to be removed from the housing prior to pairing.

If you cannot pair it for any reason wait 5 seconds then press the pairing button 5 times quickly until you hear another beep, wait three seconds then try to pair again. 

3, Locate and open the "Find My" app on your phone - it is installed by default. If you are pairing an Android click here to continue: Android Pairing Guide. Once paired to your Android device continue this guide. 

4, Tap "Items" from the toolbar at the bottom of the screen

5, Tap the "+" button

6, Tap "Other Item" and wait for searching to begin

7, Once the battery is found tap "Connect"

8, Name your tool then tap "Continue"

9, Choose an Emoji to represent your tool

10, Accept the Apple terms by tapping "Agree"

11, Read the feature set then tap "Finish"

12, Your card is now paired, Place it into the retrofit housing in the correct orientation shown in the table below and in the indicated area also shown below:

How to Charge the Tracker in Your Battery: